# Use spoofer

### If your game supports spoofer, it is enabled by default 

The switch and the spoofer label must be green

<figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/smU0n3UF7tX9FHg3jBFB/Group%205257.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure>

### Clicking on the gear on the spoofer tab will take you to the spoofer configuration window

<div align="left"><figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/tYWb2jxsMOmeahCMy9WI/Group%205255.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure></div>

### There are 2 items in the spoofer configuration window

#### Static, it's on by default

<div align="left"><figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/O9pvC0TI1fMOUPEtthHA/Group%205259.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure></div>

Allows you to set permanent, non-changeable values for hardware serial numbers when using a spoofer

{% hint style="info" %}
It is necessary so that you do not deauthorise your account, and do not cause unnecessary suspicion on the part of the anti-cheat
{% endhint %}

#### There is also a reset key on the statics unit

<div align="left"><figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/Y7MqUkBuLO72LOB3UKvU/Group%2052259.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure></div>

Allows you to change constant values, to new constant values! When you press this button, you should see the message reset successfully.

<div align="left"><figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/fw4kFnakOtLRID0Ftakg/Group%205260.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure></div>

{% hint style="danger" %}
You need to do this operation after each account lockout to get new hardware serial numbers
{% endhint %}

#### The cleanser is off by default

<div align="left"><figure><img src="https://content.gitbook.com/content/bZ0T9ostm1Sa5NqjthA2/blobs/cbLeIgY2lDqVd62WrLwD/Group%205262.png" alt=""><figcaption><p>This image is an example and may vary!</p></figcaption></figure></div>

Allows you to clean your computer from anti-reader files and other logs that anti-cheat use to mark your computer.

{% hint style="danger" %}
We advise you to turn it on when you first start up if you've previously received a lockout or played with other products
{% endhint %}

Once you have switched on and configured the spoofer, [press the run button](https://mrpro.gitbook.io/docs/launch#posle-togo-kak-vy-voshli-v-zagruzchik-nazhmite-knopku-zapusk)